Dometic Brisk Air Duo Therm RV Air Conditioner Shroud (Old Style)
- Made with indestructible polymer materials
- Installs in minutes (using original bolt holes)
- Overall dimension 35.5" x 29.5" x 12 5/8" high
- This is the last shroud you will ever buy!
Brisk Air - Dometic - Duo Therm - replacement RV air conditioner shroud fits “old style” Brisk Air 11000, 13500, and 15000 BTU air conditioners.
Note; If your air conditioner model number ends in .x21, .x22, .051, .501, .601 or .603 (example: 57915.622, 57912.622, 59516.603, 59516.501) then it is likely an old style. You should always confirm measurements before purchasing.The original Brisk Air has a 2" grey band attached along the bottom and on some the rear side is left open. The ICON replacement Brisk Air (Old Style) has the extra 2 inches molded as one piece and the rear enclosed for added durability and protection.
When you buy this product from us you have complete peace of mind, knowing that it was produced to domestic quality standards, in our North American production plant.
Truly the last shroud you will ever have to buy!
This product is in stock and available to ship nation wide!
Color: Polar White
Customers Who Viewed This Product Also Viewed
Showing reviews 1-8 of 23 | Next
could be thicker!
Posted by Larry K Laughlin on 25th Feb 2019
I’m a little disappointed in it’s gauge or thickness. The UV will surely ‘have its way’ with the plastic, sooner than later, I expect. Nor do I expect the cover to hold up to hail very well. But we’ll see. The old ones I had on there were pretty hammered after only ten years.
I wanted to address your concerns on thickness. Thickness is actually a very limited factor in regards to the product durability. Where the originals use a thicker more rigid ABS plastic, our premium aftermarket AC Shrouds use a more malleable/softer High Molecular Weight Polyurethane.
So in regards to hail (or other) impact, our part absorbs the damage and rebounds rather than fracturing. This material is also less susceptible to damage due to extreme temperature fluctuations for this same reason. Put simply - it just has more 'give'.
With this mentality in mind, that is why the material may not be as thick as the original. We do more with less (but higher quality, more fitting) material.
The HMW material also has very elaborate UV inhibiting properties. Where many plastics become brittle or "dry rotten" with UV damage, this will not be your experience with our shrouds. The material will retain it's malleability for years to come.
Shroud fits perfect on my 1993 4 star horse trailer
Posted by Unknown on 21st Oct 2018
Today I replaced the shroud on my horse trailer and the holes aligned perfectly. It was the old style that had the grey around the bottom. The air conditioner is a brisk air duo therm! So happy I was able to find a replacement shroud for my 1993 horse trailer model!
Brisk "old style" air conditioner shroud
Posted by Richard on 18th Jul 2018
Pros: It fits well. Cons: Shipping was pricey
($30 or so) and it took a week to arrive.
Posted by Jim Shuff on 12th Mar 2018
It was an easy swap for the damaged original shroud. The screws holes did not line up exactly but close enough to start the screws.
Posted by Unknown on 30th Oct 2017
This product fit my 1997 camper air conditioner unit perfectly. And was easy to install.
Customer service was very knowledgeable and easy to talk to.
Posted by Jeff on 11th Jul 2016
It was a prefect fit. I didn't have to drill any additional holes or anything...just simply install and move on. Product seems to be more solid than the one I was replacing.
Bought the Dometic Due Therm Shroud (Old Style)
Posted by Unknown on 29th May 2016
Received it and had it installed in 30 minutes. Works well and as advertised.
a lot nicer than the original
Posted by Steve on 21st Apr 2015
Bought these to replace old broken factory covers, seem to be thicker and less brittle than them. Easy to install, did have to add a couple holes.
Showing reviews 1-8 of 23 | Next
To track your Icon Technologies.com order please enter your order number and click 'Track Order'.