Tandem axle keystone fender skirt. Constructed of durable high-impact ABS plastic. This fender skirt fits various Keystone models including: Montana Travel Trailers & fifth wheels.
70 1/8" x 11 1/4" - Tandem axle Keystone fender skirt. Constructed of durable high-impact ABS plastic. This replacement fender skirt is textured.
This fender skirt fits various Keystone models including: Montana Travel Trailers & fifth wheels.
Measurements Corresponding to our Measurement Form:
A: 38" (from hole to hole, as shown in diagram)
B: 6"
C: 11 1/4"
D: 5 1/2"
E: 5 1/2"
F: 70 1/8"
Check your measurements and compare them to the drawing above to verify fit for your RV.
A perfect fit for my 2019 Cougar 26RBSWE. Feels much sturdier than the factory part. Replaced both skirts six months ago when the factory skirt screwholes degraded and they fell off. One of those (I am replacing with this purchase) got taken out by a blowout strong enough to crease my J-wrap. It tore the skirt bottom off its center brace, yet none of the top screwholes even cracked.
The black color and dimensions matched my Cougar factory skirts perfectly, though the material was beefier, especially the "stiffener" angles around the edges. Factory put my originals on crooked(!) so I drilled some new holes to make the new job look fabulous. This is our second set of Icon Direct skirts (did former rig also), so I knew they would be quality.
Had no trouble installing. Slightly different color than other side but that is age. The trailer is 10 years old.
The fender skirts fit almost like factory made. I talked to Jon and was great to work with. He helped find the right fender skirt. Thanks for your help Jon!!
Even though it was not an exact fit, which required drilling new holes, the finished job looks good.
Purchased this for my 2012 Keystone Cougar 297RKS. Tried my local dealer with no luck.
The quick service from ICON gets five stars.
The skirt material feels better than the original factory pieces. Thicker probably more durable. UV Resistance, time will tell, but five stars.
Overall dimensions and the radius under the trailer edge we’re right on. Five stars
The screw hole pockets were off as much as 3/8 of an inch on both sides of center. This required installing the screws at quite an angle to use the original factory holes and not drill more holes in the side of the trailer body.
Two stars
Overall the job finished pretty well, but the fit should have been better.
Fit great color slightly off
The fit and color was not the same as the originals but close enough. The fitment was easy enough and covered the stock skirt holes. I am satisfied however would have ordered a different color if it would have been more clear.
Ordered these online and dealt with Jonathan . He was extremely helpful and these arrived as stated and fit wonderfully. Would definitely do business with again. Thanks a lot for the great customer service and product
