Coleman Air Conditioner Shroud - PW

(16 reviews) Write a Review
USD $149.00
Orders over $700 ship free!

Aftermarket Coleman-Mach shroud fits many Mach and Roughneck series Air Conditioners. Attaches with the original hardware (not included). Overall Dimensions: 42" x 30" x 12 3/4".

Calculated at Checkout
Polar White

This replacement air conditioner shroud fits many of the Coleman Mach series air conditioners. Attaches from the top with the original 4 mounting bolts. Overall product dimension is 42" x 30" x 12.75" high. The hole to hole dimension on the top is 20.85" lengthwise and 17.75" for the width.


Polar White in colour but also available in Black.

  • Made with indestructable polymer materials
  • Installs in minutes (using original bolt holes)
  • This is the last shroud you will ever buy!

The shroud fits these air conditioners the best:

  • 8332 Series Mach 1
  • 8333A Series Mach 3 Plus Air Conditioner
  • 8333B Series Mach 3 Plus
  • 8333C Mach 3 Plus
  • 8335 Series Mach 15 Air Conditioner
  • 8335C Mach 15
  • 8373 Series Air Conditioner
  • 8473 Series Roughneck International Air Conditioner
  • 8473 Roughneck International Series with R-407C
  • 8433 Series Mach 3 Plus Roughneck
  • 8533 Series Sea Mach Air Conditioner
  • 8534 P.S. Heat Pump Series
  • 8535 Series Heat Pump
  • 8632 Series Mach 1 P.S.
  • 8633 Series Mach 3 Power Saver Air Conditioner

The shroud fits the following air conditioners, but they are taller so there may be a gap between the bottom of the shroud and the roof of your RV:

  • 8333D Series Mach 3 Plus
  • 8335D Series Mach 15
  • 8433 "D" Series Mach 3 Plus Roughneck
  • 8533 "D" Series Sea Mach Air Conditioner
  • 8534 "D" P.S. Heat Pump Series
  • 8535 "D" Series Heat Pump
  • 8632 "D" Series Mach 1 P.S.
  • 8633 "D" Series Mach 3 P.S.

The fit will vary for other air conditioners. To ensure that this shroud will fit, please measure the distance from the roof of your RV to the top of your air conditioner. Once you have this measurement compare it to the height of this shroud which is 12.75 inches. If the height of your air conditioner is about 12.75 inches then this shroud should fit perfectly. If your air conditioner is taller than 12.75 inches then the shroud will still fit, but the bottom of the shroud might not sit flush on your roof.

Reviews (16)

Average Rating: 5/5

Share your thoughts with other customers

Write a Review
  • 5

    fits good thanks

    Written by Merlyn Pickner on 5th Jan 2021

  • 5
    Perfect Fit, Easy to Install

    Searching for a replacement shroud, I couldn't find a match to the serial number on the nameplate so I feared I was in for a big inconvenience. But after a very brief live-chat session, I was directed to the exact shroud that fit my A/C. I verified the dimensions before placing the order and when the package arrived (very quick turnaround), I found the fit to be perfect. I added four fender washers (no plastic washers included with the shroud) and replaced my stripped Philips screws with 1/4" hex bolts and the whole setup is far better than before.

    I highly recommend Icon Direct; their website and live chat made finding the correct part very easy for me, and their order fulfillment was very fast. Shipping costs are rather high, but I don't think that's their fault; overall, Icon's prices seem to be very competitive. I would order again.

    Written by Brian on 10th Apr 2019

  • 5
    A/C Shroud

    The cover was received quickly and it was installed on a windy day without any problems. I did have to slightly enlarge the holes before fitting, but that was mentioned in another review.

    Written by Craig on 19th Apr 2015

  • 3
    Coleman RV A/C shroud

    Price is good, however the bolt holes did not line up well with the A/C unit, so I had to enlarge 2 of the pre-drilled holes in the shroud to make it work. Other than that, I did receive the shroud very quickly. I'm selling the R/V, so I wasn't going to return it because the holes were off.

    Written by Anonymous on 10th Nov 2014

  • 5
    Air conditioner shroud

    Appears to be of far better quality that the oem cover, and it fit perfectly.

    Written by Allen on 15th Aug 2011

  • 5
    Fits Great!

    Appears to be of far better quality that the oem cover, and it fit perfectly.

    Written by Allen S. on 19th Jul 2011

  • 5
    better than the original?

    I replaced the cracked and broken shroud on my 1985 Prowler with an Icon Direct, and am completely satisfied and totoally impressed. I have not had my Rv long, but know that an RV dealer had told the previous owners they would have to pay more than double what I paid from Icon Direct if a replacement could be found at all.
    It fits perfectly, the holes lined up exactly, is pliable and was a snap to install, and it looks great.
    I would buy again from this company and certainly will tell other Rving friends about it.

    Written by GL Martin on 16th Jun 2011

  • 5
    Coleman A/C shroud

    After installing both a/c shrouds, I would recommend that you provide the neopreme washers with each new shroud. [4pershroud]. The installation is straight forward, using the same hardware, but the neopreme washers deteriate the same as the original shroud. I will definitely recommend the product to my RVing friends.

    Written by L. Richard Bradt on 30th Mar 2011

  • 5
    Easy Replacement

    Got this to replace a shroud on a Fire Department Rescue Truck damaged in a storm. Although shaped a little different than the original, it fit perfectly onto the A/C unit and took only about 10 minutes to complete. Quality is excellent.

    (Originally posted "Friday, February 27, 2009 2:46:17 PM" on a previous version of

    Written by Jerry Bohley on 31st Aug 2010