Dometic Penguin Duo Therm Air Conditioner Shroud - Black
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 5 and get 10% off
- Buy 6 or above and get 12% off
- Made with indestructible polymer material
- Installs in minutes (using original bolt holes)
- Overall dimension is 40" x 28.5" x 6.5" high.
- This is the last shroud you will ever buy!
Also Available in Polar White.
This shroud fits the low profile Dometic Duo-Therm Penguin air conditioners. This shroud fits a large selection of 15000 BTU, 13500 BTU, and 11000 BTU including the following models:
Customers Who Viewed This Product Also Viewed
Posted by Ronnie on 22nd Dec 2015
The quality and strength of this shroud seems to be great with one exception. The rear screw holes are not in the correct place and needed to be redrilled, but that only took about 2 minutes for both holes. Our MH has 3 Penguin units on the roof and the original ones that are now about 12 years old were falling apart. I replaced all 3 shrouds and hope they last as long as the originals!
Posted by Dave on 10th Jul 2014
When ordering I forgot to check the driver side vent holes and had to cut in my own. back 2 screw holes were off but drilled new ones No problem.
great fit and finish ... arrived on time
Posted by Roland on 20th Sep 2012
This A/C shroud is of excellent quality and fit perfect.
Fit perfectly - nice finish in black
Posted by Richard on 6th Aug 2012
Fit over the base perfectly. Seems very durable and hopefully the last we'll need to install.
Front pre-drilled holes were perfect, however the rear side pre-drilled holes on the new product needed to be 1/4" further to the rear. So, I used a 1/8" bit, drilled a new hole in the metal base (using the rear holes in the new cover) and installed a #10 X 3/4" sheet metal screw. I also installed one more screw center front and one more approx. 8" from the front on each side. Total 7 mounting screws.
Posted by Joe on 22nd Dec 2011
Great product, better than original equipment.
To track your Icon Technologies.com order please enter your ordernumber and click 'Order'.